Navigation
index
CCA home
|
Documentation
»
Quick search
CCA User’s Guide contents
ΒΆ
Introduction
System Requirements
ABAQUS/COMPRO User’s Guide
Introduction
Basic Concepts
Setting up the analysis
Considerations for the composite part
Considerations for the tool
Considerations for the tool-part interface
Load and boundary condition considerations
Tool removal considerations
Running the analysis
Analyzing the results
MSC.Marc/COMPRO User’s Guide
Basic Concepts
Setting up the analysis
Running the analysis
The cca-configuration.xml File
A Brief Note About XML Files
Elements
Data
Comments
Required Elements and Attributes
<configuration> ... </configuration>
<directory type= “data” path= “mydata” />
<directory type= “output” path= “” />
<model_units system= “SI|Imperial|USCS” />
<analysis_code engine= “ABAQUS” />
<debug screen= “false” file= “false” filename= “debug.csv” debug_element= “1” />
<user_material id= “some_id”>...</user_material>
<composite_file name= “AS4-3501-6.xml” />
<initial_doc DOC= “0.001” />
<smearing A= “1.0” B= “0.0” />
The CCA Data File Formats
Material Type=”Composite”
<constituent volume_fraction= “[0-1]” type= “fibre|matrix” > name </constituent>
<micromechanics model= “default | bogetti_and_gillespie | modified_rosen_and_hashin | chamis” />
<lamina_properties>
Material Type= “Fibre”
Material Type= “Matrix”
Creating a Simple Material Datafile
Material Data
Destination Format
File Naming Convention
Matrix Data File
XML Declaration
File Header
Material Element
Conductivity
CTE
Cure Kinetics
Density
Modulus Development
Poisson’s Ratio
Specific Heat
Cure Shrinkage
Viscosity
Complete Data File
Fibre Data File
Composite Data File
Navigation
index
CCA home
|
Documentation
»